When brazing copper, it is imperative to purge with nitrogen in order to minimize or eliminate oxidation that results from heating the copper pipe. Without purging, oxidation will occur and the oxidized flakes that result can and will break off and flow through the system, damaging bearings and fouling system filters. All that is needed is a low pressure, low volume flow of nitrogen. The use of dry nitrogen gas also minimizes the need to evacuate moisture from the system.
TURBOTORCH® Regulator, Nitrogen Gas, 2 in Gauge, 0 to 250 psig Delivery Pressure, 4000 psig Maximum Inlet, Brass Body
| Body Material | : | Brass |
| Delivery Pressure Range | : | 0 to 250 psig |
| Gas Type | : | Nitrogen |
| Gauge Size | : | 2 in |
| Maximum Inlet Pressure | : | 4000 psig |
Catalog