REZNOR® V3 series model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30000 - 400000 Btu/hr gas input. All sizes are approved for commercial/industrial installations. sizes 30 - 125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82 - 83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA). REZNOR® V3 series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for sizes 30 - 125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove.
REZNOR® Unit Heater, Series: V3 Series, Model: UDAP, 124500 Btu/hr, 115 V, 3.8 A, 752 fpm, 1921 cfm CFM Rating, 392 W, 1 ph, 60 Hz, 1/2 in, Natural Gas, Direct Spark Ignition, 60 deg F, 20-1/8 in H x 38-3/16 in W x 42 in D
| Amperage Rating | : | 3.8 A |
| BTU Rating | : | 124500 Btu/hr |
| CFM Rating | : | 1921 cfm |
| Connection Size | : | 1/2 in |
| Dimensions | : | 20-1/8 in H x 38-3/16 in W x 42 in D |
| Flow Rate | : | 752 fpm |
| Frequency Rating | : | 60 Hz |
| Fuel Type | : | Natural Gas |
| Ignition Type | : | Direct Spark |
| Model | : | UDAP |
| Phase | : | 1 ph |
| Power Rating | : | 392 W |
| Series | : | V3 Series |
| Temperature Rating | : | 60 deg F |
| Voltage Rating | : | 115 V |