Owens Corning® ProPink ComfortSeal™ Gun Foam Sealant is a multi-purpose one-component polyurethane foam designed specifically to fill and seal cracks, crevices, and smaller cavities on flat or irregular surfaces.
Owens Corning ProPink ComfortSeal™ Gun Foam Sealant, 24 oz Net Content, Aerosol Can Container, Liquid Form, Off-White/Off-Yellow, Composition: Urethane Pre-Polymer Blend (Non-Hazardous Polyol Blend), Alkanes, C14-C16, Chloro, 4,4' Diphenylmethane Diisocyanate, Polymethylene Polyphenyl Isocyanate (PMPI), Isobutane, Dimethyl Ether, Propane, 5 min Dry Time, 24 hr Full Cure Time, 4403 sq-ft Coverage Area, 1.1 Specific Gravity, 165 g/L VOC, Applicable Materials: CPVC, Plastics, Polyethylene, PVC, Rubber, 55 deg F
| Applicable Materials | : | CPVC, Plastics, Polyethylene, PVC, Rubber |
| Color | : | Off-White/Off-Yellow |
| Composition | : | Urethane Pre-Polymer Blend (Non-Hazardous Polyol Blend), Alkanes, C14-C16, Chloro, 4,4' Diphenylmethane Diisocyanate, Polymethylene Polyphenyl Isocyanate (PMPI), Isobutane, Dimethyl Ether, Propane |
| Container Type | : | Aerosol Can |
| Coverage Area | : | 4403 sq-ft |
| Dry Time | : | 5 min |
| Form | : | Liquid |
| Full Cure Time | : | 24 hr |
| Net Content | : | 24 oz |
| Specific Gravity | : | 1.1 |
| Temperature Rating | : | 55 deg F |
| VOC Content | : | 165 g/L |
- 24oz. can of a one-component polyurethane
- Interior/exterior use
- Tack free in 5 minutes
- Cuttable in less than an hour
- Fully cured within 24 hours depending upon moisture and temperature conditions
- Can be sanded, painted or stained once cured
- Will adhere to most building materials (exceptions: Teflon®, silicone, oils and greases, mold release agents, and similar surfaces)
- Water resistant and will not harm electrical wire insulations, rubber, PVC, CPVC, polyethylene, or other plastics
- Requires a reusable dispensing unit for metered applications
SDS