The MARS Suction Line Filter Driers are designed to effectively clean up the refrigerant system by removing solid contaminants and harmful acids that were created during a motor burnout. As well as motor burnout applications, the MARS Suction Line Drier should be installed in remote systems with long refrigerant lines. The filter drier will collect and hold any dirt that is in the evaporator or suction line at start up. Any field built-up system requires the protection that the MARS Suction Line Drier offers. The desiccant block core effectively removes and holds a maximum amount of contaminants with minimum pressure drop. The binding material in the core protects the core from acid decomposition and allows it to collect and hold organic and inorganic acids from motor burnout. An inlet deflector spreads the refrigerant flow evenly across the molded core to provide full filtration capacity and to prevent erosion of the core.
Mars® Suction Line Filter Dryer, Model: MSD-166S, ODF Connection, 600 psig, R-12, R-134A, R-22, R-404A, R-410A, R-507 Refrigerant, 1.2 ton Flow, Finish: Painted, 2.5 in Dia x 6.95 in L
| Connection Type | : | ODF |
| Dimensions | : | 2.5 in Dia x 6.95 in L |
| Finish | : | Painted |
| Flow Capacity | : | 1.2 ton |
| Model | : | MSD-166S |
| Pressure Rating | : | 600 psig |
| Refrigerant Type | : | R-12, R-134A, R-22, R-404A, R-410A, R-507 |
- Designed to effectively clean up the refrigerant system by removing solid contaminants and harmful acids that were created during a motor burnout
- For use on R134A, R12, R22, R500, R404A, R410A, R507
- Dual access valve for accurate pressure drop readings
- Solid block desiccant core
- High organic and inorganic acid removal
- Proven, nylon internal check valves
- High moisture removal
- Corrosion-resistant paint
- Minimum burst pressure 2500 lbf/sq-in
- Solid copper ODF fittings
Catalog