Hart & Cooley® Pipe, 4 in Nominal, Material Standard: G90, Aluminum/Steel, Galvanized, 4-1/2 in OD, 0.012 x 0.018 in Wall Thickness, 48 in Length
| Finish | : | Galvanized |
| Length | : | 48 in |
| Material Standard | : | G90 |
| Material | : | Aluminum/Steel |
| Nominal Size | : | 4 in |
| Outside Diameter | : | 4-1/2 in |
| Wall Thickness | : | 0.012 x 0.018 in |
- 3 to 12 in pipe and fitting couplers overlap 1-3/8 in when joined together therefore, assembled length is 1-3/8 in less than listed length
- A full set of installation instructions are supplied with cap and support
- Unique locking band provide 360 deg turning radius of the pipe and fitting
- Locking band slide over tab easily, lock firmly without twisting, locking tab hold pipe securely together, can be easily unlocked
- Reinforced end, curled bead on end of outer pipe for rigidity and strength
- Deep locking groove assures solid joint and secure lock
- Corrosion-resistant aluminum inner wall for rapid warm-up
- Galvanized steel outer pipe for maximum protection
- Positive stop provide proper alignment and positive fit for mating end of pipe or fitting
- UL listed for installation in 2 x 6 wall
Catalog
