Access doors are used in duct systems for many reasons. Entry is often required to facilitate duct cleaning, examine equipment, or to test, repair, or troubleshoot system components. NHSAD & NCSAD Self Stick Access Doors provide an easy four step solution. Size and cut a hole in the duct wall. Peel the release paper from the foam gasketed access door frame. Press the frame into position. Insert one screw into each of the four pre-punched holes in the frame. Cam Only access doors are typically used in tight spaces where a hinge is not functional. The anti-runaway Safety Cable on the CSADSC Access Door prevents the door from dropping on the jobsite and getting lost or damaged.
Duro Dyne® Self-Stick Access Door, 24 ga Gauge, Steel, Finish: Galvanized, 10 in Length, 10 in Width
| Finish | : | Galvanized |
| Gauge | : | 24 ga |
| Length | : | 10 in |
| Material | : | Steel |
| Width | : | 10 in |
- 24 gauge galvanized steel construction
- Saves time and is easy to position - No frame "dove tails" to align and bend
- No duct sealer or tape needed for full seal
- 10 stock sizes from 6x6 through 24x24
- Tested to 10" SP with less than 2% leakage
- One inch wide gasketed frame for fastening and sealing integrity
- Doors insulated with one inch thick fiberglass