Sturdy and stable, DiversiTech® heat pump riser provides the desired elevation for condensers, heat pumps and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in one or two-piece risers. Four risers can handle up to 2000 lb uniform load.
DiversiTech® Riser, 6 in Connection, 6 in Length, Polypropylene, Finish: Gray, 6-1/2 in W x 6-1/2 in H, Domestic/Import: Domestic
| Connection Size | : | 6 in |
| Dimensions | : | 6-1/2 in W x 6-1/2 in H |
| Domestic/Import | : | Domestic |
| Finish | : | Gray |
| Length | : | 6 in |
| Material | : | Polypropylene |
- High-pressure injection molded polypropylene - medium gray colors, butyl mastic on the top and bottom guarantees no slipping
- All sizes of heat pump risers can handle a uniform load of 2000 lb with no failure when installed under the unit in an array of at least four heat pump risers
- All sizes of heat pump risers can handle a point load, applied to one square in area in the center of the footpad recess on the top of the HPR, of less than 800 lb with no failure
- High-pressure injection molded polypropylene - medium gray or black color, butyl mastic on the top and bottom guarantees no slipping
- Simply peel the release liner from the mastic before placing the heat pump riser and equipment
Catalog
