Aspen LEW30F4-000+FCS08 LEW30F4000FCS08
Aspen LEW Series LEW30F4-000+FCS08 Air Handler, 30000 Btu/hr BTU, 208/240 V, 3 A, 1/3 hp, 60 Hz, 1 ph-Phase, Domestic
- Manufacturer: Aspen Manufacturing
- Brand Name: Aspen
- Part Number: LEW30F4000FCS08
- MPN: LEW30F4-000+FCS08
- Min. Order Qty: 1
- Qty. Interval: 1 Sign In for Availability
-
Price:
Aspen Air Handler, LEW Series, 1.5 to 3 ton Nominal Capacity, 30000 Btu/hr, 208/240 V, 3 A, 1/3 hp, 60 Hz, 1-Phase, Downflow, NPT Connection, R-410A Refrigerant, 15 A Fuse Rating, 3/4 in Connection, 3/8 in Liquid Line, 7/8 in Suction Line, 20 x 20 x 1 in Filter, ECM Motor, Steel, Finish: Galvanized, 36 in H x 24 in W x 21 in D, Domestic/Import: Domestic
| Amperage Rating | : | 3 A |
| BTU Rating | : | 30000 Btu/hr |
| Configuration | : | Downflow |
| Connection Size | : | 3/4 in |
| Connection Type | : | NPT |
| Dimensions | : | 36 in H x 24 in W x 21 in D |
| Domestic/Import | : | Domestic |
| Filter Size | : | 20 x 20 x 1 in |
| Finish | : | Galvanized |
| Frequency Rating | : | 60 Hz |
| Fuse Rating | : | 15 A |
| HP Rating | : | 1/3 hp |
| Liquid Line Size | : | 3/8 in |
| Material | : | Steel |
| Motor Type | : | ECM |
| Nominal Capacity | : | 1.5 to 3 ton |
| Phase | : | 1 ph |
| Refrigerant Type | : | R-410A |
| Series | : | LEW Series |
| Suction Line Size | : | 7/8 in |
| Voltage Rating | : | 208/240 V |
- Front or bottom return air position. Offset hanging brackets attach to unit and wall to allow hanging inside closet. Can be AHRI matched with most brands of air conditioners or heat pumps
- A2L refrigerants require a Refrigerant Detection System (RDS) for compliance. In accordance to UL 60335 Refrigerant Detection Systems are factory-installed on A2L refrigerant ready air handlers
- ETL listed for R22 and 410A. ETL listed for R454B and R32 with Refrigerant Detection System (RDS)
- Pre-programmed, 5-speed, 208V/240V ECM motors that ensure higher efficiency and increased energy savings by delivering constant torque during operation
- Less than 1.4% air leakage from cabinet when tested in accordance with ASHRAE standard 193. Unit must be installed according to Aspen installation instructions. Sturdy, fully insulated galvanized steel cabinet; stick pins ensure 1/2" insulation remains in place. Unit ships with disposable filter
- Direct drive multi-speed blowers circulate air quietly and efficiently. Motor speeds can be easily selected via motor terminals. Swing mounted blowers can be easily removed for service
- Heat kits available with either circuit breakers or terminal blocks.Available in 3,5,6,8, and 10 KW. Models with electric heat include sequencers and temperature limit switches for safe, efficient operation
- Electronic circuit board provides 30 secs ON/OFF blower time delay extracting more heat/cool from the coil. Automotive-style pull fuse protection on the circuit board to provide low voltage and transformer protection
- High efficiency rifled aluminum tubes/enhanced aluminum fins provide maximum heat transfer. All coils factory leak tested with two-stage pressure decay and mass spectrometer process then Nitrogen pressurized and factory sealed for maximum reliability. Access door allows for coil cleaning
- Liquid-line Schrader allows pre-installation pressure testing. Available with either check style flowrater or TXV metering device. Field-installable TXVs are also available. Galvanized metal drain pan with bottom primary and secondary 3/4" FPT drain connections or alternate right side primary
Owners/User Manual