DP® Max extended surface, pleated air filters with Airguard® technology are suitable use in virtually any air handling system, including filter banks, central station air handlers, rooftop units, side access housings, as final filters for systems with MERV 8 3 8 or MERV-A 8-A requirements or pre-filters in multi-stage systems. The filters are manufactured using sophisticated production control techniques to ensure consistent pleat count, height, shape and spacing, which contributes to better performance and longer service life. Predetermined pleat centers allow dirt to collect evenly over the entire surface of the media, resulting in a slow, steady rise in resistance to ensure maximum dust holding capacity. The 2-piece frame with double wall thickness around the outer edge provides rigidity. This coupled with a die-cut pattern with 50% more contact points between the media pack and the frame, gives DP® Max filters superior durability for use in demanding environments, where harsh conditions often cause alternative filter products to fail prematurely.
Airguard® Filter, DP® MAX Series, Pleated Filter, Synthetic Media, Beverage Board Frame, 14 in Width, 25 in Height, 2 in Depth, 8 MERV, 30 to 40 % Filter Efficiency, 7.1 sq-ft Media Area, 10 Pleats per Linear Feet, 300 fpm, 500 fpm, 625 fpm Rated Velocity, 0.21 in-WG Initial Resistance, 1 in-WG Final Resistance, 730 cfm, 1220 cfm, 1520 cfm Air Flow Capacity, 24-1/2 in H x 13-1/2 in W x 1-3/4 in D Actual, 225 deg F, Domestic/Import: Domestic
| Actual Size | : | 24-1/2 in H x 13-1/2 in W x 1-3/4 in D |
| Air Flow Capacity | : | 730 cfm, 1220 cfm, 1520 cfm |
| Depth | : | 2 in |
| Domestic/Import | : | Domestic |
| Filter Efficiency | : | 30 to 40 % |
| Filter Type | : | Pleated |
| Final Resistance | : | 1 in-WG |
| Frame Material | : | Beverage Board |
| Height | : | 25 in |
| Initial Resistance | : | 0.21 in-WG |
| MERV | : | 8 |
| Media Area | : | 7.1 sq-ft |
| Media Material | : | Synthetic |
| Pleats per Linear Feet | : | 10 |
| Rated Velocity | : | 300 fpm, 500 fpm, 625 fpm |
| Series | : | DP® MAX Series |
| Temperature Rating | : | 225 deg F |
| Width | : | 14 in |
- Filters may be installed with the pleats either vertical (preferred) or horizontal
- Exceeds American society of heating, refrigerating and air-conditioning engineers (ASHRAE) standard 52.2 air cleaning specifications for filters installed upstream of cooling coils
- 100% thermally bonded synthetic, proprietary media resists moisture, delaminating, excessive buckling, collapsing, warping and bending
- Low initial resistance facilitates efficiency and energy savings
- Resistant to mold and microbial growth
- Performs to MERV 8 3 8 before and after a conditioning step
- Material of construction - moisture-resistant beverage board frame, rust-resistant, expanded metal support grid made of galvanized steel
Specification Sheet